Fuel problems, fixed at the source.
Wake repairs outboard fuel systems across South Florida: water separators, filters, fuel pumps, injectors, carburetors and the problems ethanol fuel causes. The work is done at your dock or driveway.
- Yamaha factory-trained
- Mercury factory-trained
- ABYC electrical certified

If this sounds like your boat.
Ethanol-blended fuel absorbs moisture, and in South Florida humidity that happens fast. Boats that sit are the most at risk. Water and varnish clog filters and injectors, and the engine starts to stumble, surge or quit. We find where the problem starts and fix that, not just the symptom.
- Engine surges, stumbles or quits under load
- Hard starting after the boat has sat for a while
- Water in the separator bowl
- Fuel smell, or a primer bulb that won't firm up
- Poor fuel economy compared to before
What we actually do.
Every job ends with a test run and a plain-English summary, with photos of what we found.
- 01Fuel water separator and engine fuel filters replaced
- 02Fuel lines, primer bulb and anti-siphon valve inspected
- 03Fuel pump and vapor separator testing
- 04Injector or carburetor cleaning and service
- 05Fuel tank sampling for water and contamination
- 06Advice on fuel stabilizer and storage habits
Four steps, zero hauling.
- 01
Call, text or request a quote
Tell us the engine, where the boat is and what it's doing. A photo or video helps.
- 02
We come to you and diagnose
Dock, lift, slip or driveway. We test the engine where it sits and finds the real cause.
- 03
Clear quote before any work
You get the problem, the fix and the price in plain English. Nothing starts until you say go.
- 04
Fixed, tested, back on the water
Repaired, run and checked, with photos of what we found and what we did.
Factory-trained on the big two.
Wake is Yamaha and Mercury factory-trained, with 30+ certifications between them, and services Suzuki, Honda, Evinrude / E-TEC, Tohatsu outboards too.
Serving Fort Lauderdale, Davie, Miami, Coral Gables and nearby. See the service area
How does ethanol fuel cause problems in outboards?
Ethanol attracts and holds water. Over time, water and fuel can separate in the tank, and the mix leaves varnish in filters, pumps and injectors. Running the boat regularly, using stabilizer and keeping the water separator fresh all help.
How often should I change the fuel water separator?
At least once a year at your annual service, and any time you see water in the bowl or suspect a bad batch of fuel.
My boat sat all summer. What should I do before I run it?
Have the fuel checked for water, change the separator and filters, and confirm the battery and cooling system are healthy. A full service before the first trip covers all of it.
Often done together.
Diagnostics & troubleshooting
Won't start, stalls, loses power or throws an alarm. Found and explained at your dock.
Learn moreRoutine & 100-hour service
Oil, filters, plugs, gear lube, anodes and a full inspection. On schedule, on site.
Learn moreMarine electrical (ABYC)
Batteries, charging, wiring, gauges and ignition. Traced properly and fixed to standard.
Learn moreKeep your weekends on the water.
Tell us what's going on. We'll tell you what it takes.
Prefer to text? Send a photo of the engine and what it's doing.
